This Operator's Manual concerns the Volvo TAD734GE engine, an inline 6-cylinder direct-injection diesel engine. The engine is equipped with a common rail fuel injection system, IEGR (internal exhaust gas re-circulation), electronically- controlled fuel management (EMS 2), a turbocharger, a thermostatically-controlled cooling system and electronic speed control.
The governor controls engine speed and any generator frequencies. The extent to which a governor regulator controls engine speed depends on governor specifications. For a given position of the control lever there is a power/engine speed relationship (at stable load intervals) called "governor control" or "speed reducing".
The manual provides instructions for the installation of Volvo Penta industrial engines. The publication is not exhaustive and does not cover every conceivable installation; the contents should be considered as recommendations and guidance for normal installations.
Tools: 885675 Break-out cable 88890074 Multimeter 1 Cut the current with the main switch. 2 Disconnect the connector from the sensor. 3 Connect break-out cable 885675 to the cable harness connector to the engine control unit. 4 Use multimeter 88890074 to do resistance measurement against the engine control unit.
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap