By using the VODIA tool (3838619) in position "Parameters, reprogramming" you can read off and adjust the parameters stated below. The VODIA tool is connected to the diagnostics connector (6-pin connector block) located beneath the "cable cover" on the left side of the engine, or by using T-diagnostic connector no. 874427. Refer to the "VODIA user guide" for help in using the tool.
Make it a habit to give the engine and engine compartment a visual inspection before starting the engine and after operation once the engine has stopped. This will help you to discover quickly if anything abnormal has happened, or is about to happen. Look especially carefully at oil
The purpose of the diagnostic function is to monitor and control the engine and EATS, as well as to protect components from damage. If a malfunction is detected the diagnostic function informs of the occurred fault in the form of a fault code. The fault code provides guidance when fault tracing. All fault codes and fault messages can be found in the Fault Code Register.
Volvo Penta Industrial Diesel Engine TAD734GE ((250KW at 1500rpm, 263KW at 1800rpm, meets ISO 3046 application standard))
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat