This service manual contains technical data, descriptions and maintenance and repair instructions for standard model Volvo Penta products. A list of these products may be found in the section Specifications.
Loosen the cylinder head bolts about 1/4 of a rotation when engine warming, and then tighten them up with a force of 200+ 10 Nm immediately according to the sequence as the following figure.
The reliability of the engine might be affected because of abrasion and corrosion. In order to avoid any working abmormity of the engine, we recommend the following overhaul. The first overhaul should be proceeded after the engine has runned for 2000 hours or after two years (running time less than 2000 hours).
Notice: the engine should not be started until it has been installed in a appropriate way and placed in a final position. If the engine is operated in a closed environment, make sure there is good ventilation and that the exhaust gas is discharged into the atmosphere.
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap