Home Products News Contact Us
Home > Supports > Diesel Generators > Inspection Before Starting Diesel Generator Set

Inspection Before Starting Diesel Generator Set

Feb. 27, 2024

The Dingbo series diesel generator set is equipped with an advanced electronic controller, which may include the following types: HGM6100, HGM6300, HGM6400, HGM6400, etc. This control system allows operators to manually or automatically control the generator. When a problem occurs, it will not issue a warning or stop protecting the circuit. Because generator sets equipped with automatic control systems can start automatically without warning, the switch should be turned off before checking the control screen.


diesel generators


Before starting the diesel generator, the following checks should be carried out:

 

1. Turn off the control switch power/emergency stop switch.

 

Warm reminder: Do not open the heating cover when using coolant or heating. Do not add a large amount of coolant to a hot cooling system, as it may cause serious damage.

 

2. Check the oil and coolant levels of the diesel generator, and top up if they are not sufficient.

 

Warm reminder: When filling oil tanks, do not smoke or use open flames nearby, and check if the oil is clean.

 

3. Check the fuel level and add it if necessary.

 

4. Check the tightness of the cooling fan and motor belts of the diesel engine, and tighten them when loosened.

 

5. Check all hoses to see if there is a possibility of loose or worn connections. If so, tighten or replace them.

 

6. Check if the battery electrodes are corroded, and clean them if they are.

 

7. Check the nighttime level of the battery, and if necessary, add distilled water. If the battery is new and has never been charged, add the pre prepared battery liquid.

 

8. Check if there is a large amount of dust and dirt on the control screen and generator, which can cause electric shock or make cooling difficult.

 

9. Check the air filter blockage indicator. If there is any blockage, please replace the filter.

 

10. Clean the surrounding area of the generator and remove unsafe items to avoid affecting operation or danger. Make sure that the heat dissipation network is not blocked.

 

11. Observe and inspect the fuel system, cooling system, and lubricating oil seals of the unit for any leaks.

 

12. If the smoke exhaust system has a drainage valve, the condensate water should be discharged regularly.

 

13. Ensure that the switch of the output circuit of the AC generator is in the closed state (handle down).

 

14. Check the lubricating oil level and add oil if necessary.


Founded in 1974, Dingbo Power Generation Equipment Co., Ltd. is a professional manufacturer of diesel engines, generators and generator sets, and one of the earliest manufacturers of diesel engines, generators and generator sets in China. Since 1992, the company has been a qualified generator set manufacturer inspected by the National Internal Combustion Engine Generator Set Quality Supervision and Inspection Center. Over the years, the company has carried out extensive cooperation with Shanghai Diesel, Weichai, Sweden Volvo, Sino US joint venture Chongqing Cummins, American Qianglu and other companies, and has become a (OEM) supporting factory and technical center. It has 64 sales service departments nationwide, providing users with design, supply, commissioning and maintenance services at any time. Dingbo quality is worth depending on. If you want get more information, please feel free to send email to sales@dieselgeneratortech.com we will pay highly attention on your question.

Contact Us

  • Add.: No. 10 Kechuang Road, High tech Zone, Nanning, Guangxi, China
  • Tel.: +86 771 5805 269
  • Fax: +86 771 5805 259
  • Cellphone: +86 134 8102 4441
                    +86 138 7819 8542
  • E-mail: sales@dieselgeneratortech.com
Follow Us

Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap

Update cookies preferences
Contact Us