Manual and Automatic Operation Steps of Shangchai Diesel Generator Set

The supporting power of the Dingbo series Shangchai diesel generator set is a diesel engine produced by Shanghai Diesel Engine Co., Ltd. It has excellent power, economy, stability, reliability, and operability, and is deeply loved by users. However, many new users have certain misconceptions about the operation of diesel generator sets. Improper operation can have adverse effects on diesel generator sets. Therefore, in this article, Dingbo Electric will provide a detailed introduction to the manual and automatic operation steps of Shangchai diesel generator sets for users.

Generally speaking, there are two ways to start a diesel generator set, one is manual and the other is automatic switching. Before starting the Shangchai diesel generator set, it is necessary to carefully check whether the wiring of each part is correct, whether the connecting parts are secure, whether the electric brushes are normal, whether the pressure meets the requirements, and whether the grounding wire is good.

Manual operation steps

Turn on the power and wait for the control panel of the diesel generator set to reset. After resetting, press the manual button to switch the starting mode of the unit to manual mode. Press the start button to complete the start, close the switch, press the page turning button on the control panel, and check whether the performance status is normal. Before shutting down, open the switch first, then press the stop button. After 120 seconds of shutdown, the generator set will automatically shut down.

Automatic operation steps

Turn on the power, in automatic mode, connect the 220 self starting signal line according to the electrical schematic, with a wire harness size of 1.5 square meters. After connecting the 220 self starting signal line, turn on the switch, and the power bank will start charging the battery. Then close the switch cabinet and press the automatic button. When the mains power stops, the generator set will automatically start and put into operation.

Regarding the manual and automatic operation steps of the Shangchai diesel generator set, users can refer to the above methods. Before starting, users must check whether the coolant and oil in the diesel generator set water tank have reached a reasonable range, and carefully inspect whether there are any hidden faults in the relevant components. If any faults are found, they must be eliminated in a timely manner before starting. After starting the unit, there should be a dedicated person on duty to observe the changes in important factors such as oil pressure, water temperature, oil temperature, voltage, and frequency during operation. It is strictly prohibited to start and stop with load!

Dingbo Power has advanced testing equipment, modern production technology, professional manufacturing technology, perfect quality management system, and strong technical research and development capabilities. It can provide 3KW～2500KW various specifications of ordinary, automatic, four protection, automatic switching, low noise and mobile generator sets, high quality and low energy consumption to meet the diverse power needs of customers, and can also meet users with different voltages and different frequencies. It is required to create a parallel power supply system for multiple units. If you are interested in our product or any question on generator, welcome to send email to sales@dieselgeneratortech.com.