Precautions for Unboxing and Acceptance of Diesel Generator Sets

After the diesel generator set is safely delivered by the manufacturer to the receiving location designated by the customer in accordance with the contract terms, an unpacking inspection is necessary before installation and acceptance to effectively safeguard the customer's interests. In fact, there are numerous details worthy of attention during the unpacking process of diesel generator sets. Here, Dingbo Power, a diesel generator manufacturer, cordially reminds everyone to take note of the following points to avoid causing losses to the diesel generator set due to negligence.

Before unpacking, first clean the dust on the casing of the diesel generator set and carefully examine whether the casing is damaged. Meanwhile, earnestly verify the box number and the quantity of equipment. When unpacking, exercise extreme caution to avoid damaging the unit equipment. The unpacking sequence is to remove the top panel first and then the side panels. After completing the unpacking, the following tasks need to be carried out:

Carefully count all generator sets and related accessories according to the diesel generator set list and the packing list.

Check whether the main dimensions of the diesel generator set and its accessories match the design drawings. After all, diesel generator sets of different brands and powers vary in size.

Conduct a comprehensive inspection to check whether the diesel generator set and its accessories are damaged or rusted. During transportation, the equipment may be damaged due to factors such as road bumps, so a meticulous inspection is crucial. Once problems are detected during the unpacking inspection, communicate and coordinate with the manufacturer as early as possible to enable timely replacement or repair of the diesel generator set.

Diesel generator sets are not affected by power grid failures and feature high reliability. Especially in some areas where the mains power supply is unstable, using a diesel generator set as a backup power source can not only serve as an emergency power supply in critical situations but also ensure that some important daily loads can still operate normally during power outages through reasonable optimization of the low-voltage system. As a result, they are widely applied in various projects.

If the diesel generator set cannot be installed promptly after inspection, reapply anti-rust oil to the machined surfaces of the disassembled parts to ensure proper protection. Do not rotate the transmission parts and sliding parts of the generator set before the anti-rust oil is removed. If the anti-rust oil has been removed for inspection, immediately reapply it after the inspection is completed.

Pay special attention to the storage of the unpacked diesel generator set. It must be placed horizontally, and the flanges and all kinds of interfaces should be covered and wrapped to prevent rainwater and sand from entering.

As a professional diesel generator manufacturer, we always insist on using first-class talents to build a first-class enterprise, create first-class products, create first-class services, and strive to build a first-class domestic enterprise. If you would like to get more information welcome to contact us via [email protected].