Ensure All Technical of Generator Set Meet The Standards

How will you ensure that all aspects of the generator set meet the standards? In order to ensure that the generator set meets various technical specifications, it is necessary to ensure a good match between the diesel engine and the generator during the design and manufacturing of the unit, including power and speed. The power of a generator set refers to the effective power that can be achieved during normal operation at rated speed for 12 consecutive hours. The power of a synchronous generator set refers to the rated electrical power obtained at the output terminal during long-term continuous operation at rated speed.

In the daily use of a generator set, there is usually power loss, and the power factor of the generator set can also be reduced to 0.8. So how can we improve the power factor of the generator set? All leaking valves and valve seats should be ground. The traditional grinding method is done on a valve grinder, or a rubber bowl shaped grinding tool can be used to suck the valve, manually rotate the valve seat ring back and forth, and knock it up and down to achieve sealing.

Due to the low efficiency of manual grinding, it is recommended to use point grinding to grind the valve in practical work. When using a flashlight to grind the valve, the following key points should be mastered. First use coarse grit, then fine grit. When applying grit on the valve working surface, it is necessary to install the valve stem body into a cloth or soft material to prevent grit from entering the valve guide, in order to reduce damage to the valve guide. This is because the electric drill tells the operator that it will inevitably accelerate wear and tear. The drill chuck should be clamped tightly. During operation, the electric drill bit should be kept perpendicular to the valve top, and the electric drill bit should be slightly raised to grasp the grinding time. In addition, the valve working surface should also be checked frequently.

Guangxi Dingbo Generator Set Manufacturing Co.,Ltd was founded in 1974 and is one of the earliest manufacturers of generators and diesel generator sets in China. The company has a registered capital of 218.88 million yuan. The company covers an area of 86,000 square meters and a building area of 55,000 square meters. There are more than 660 employees, including 456 professional technicians and 106 senior technicians. It has 46 sales and service outlets nationwide. The main products are diesel engines, generator sets, and diesel generators, providing users with a one-stop service of design, supply, debugging and maintenance at any time. Dingbo has always insisted on using first-class talents, building first-class enterprises, manufacturing first-class products, creating first-class services, and making every effort to build a first-class domestic enterprise. If any question please feel free to visit our website https://www.dieselgeneratortech.com/ or send email to sales@dieselgeneratortech.com.