At present, according to the different power consumption and various specific conditions, each unit uses diesel generator sets, and some units use gasoline generator sets, although various types of machines have their own structural characteristics. However, the disassembly methods are basically similar. The following takes the 4135 diesel generator set as an example to introduce the method and steps of disassembly of the generator set.
The fuel leaks into the oil basin, the plunger of the diesel engine fuel injection pump wears too much, the injector needle is not closed tightly or the needle valve is stuck in the open position; the clearance between the piston, the piston ring and the cylinder is too large, so that Fuel leaks under the cylinder wall to the oil sump.
At present, the generator shell paint products on the market are dazzling, and the functions of each series are different. How to choose a generator shell paint product that is suitable for yourself and the economy and whether there are tricks in the use of the generator shell paint to save unnecessary expenses is a concern of many users.
It takes a while for the oil film to re-establish between the crankshaft and the bearing, between the piston and the cylinder liner after the engine is started. The optimum clearance between moving parts can only be obtained after the engine parts reach the normal working temperature. Therefore, with the engine's heat engine, the engine speed is gradually increased from no-load speed 650r/min to 1000-1200r/. The preheating operation of the diesel engine is carried out at min.
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat