The manual provides instructions for the installation of Volvo Penta industrial engines. The publication is not exhaustive and does not cover every conceivable installation; the contents should be considered as recommendations and guidance for normal installations.
Tools: 885675 Break-out cable 88890074 Multimeter 1 Cut the current with the main switch. 2 Disconnect the connector from the sensor. 3 Connect break-out cable 885675 to the cable harness connector to the engine control unit. 4 Use multimeter 88890074 to do resistance measurement against the engine control unit.
Volvo Penta power generation engine oil change intervals can vary between 150 and 500 hours depending on the quality of the lubricant and the sulphur content of the fuel. Note that the oil change interval should never be longer than 12 months.
885675 Break-out cable 88890074 Multimeter 1 NOTICE! Cut the current with the main switch. 2 Undo the connector from the sensor and remove the sensor from the cylinder head. Check that the sensor does not have any external damage, or any swarf which has got stuck on it. 3 Connect break-out cable 885675 to sensor. NOTICE! Do not connect the other end of the adapter cable to the engine cable harness, since
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat