This accelerator pedal/potentiometer corresponds to the control unit standard value (0.5 V or 4.5 V respectively). The end position resistor is used to detect electrical faults in the accelerator/potentiometer (end position resistors are built into many accelerators/potentiometers and do not need to be added in these cases).
Read the safety instructions for handling and service in chapter "Safety information" before starting work.
NOTICE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality requirements above. 1) If sulphur content is > 1.0% by weight, use oil with TBN > 15. 2) The oil must also comply with at least one of the following specifications: ACEA:E7, ACEA:E5, Global DHD-1, API:CI-4 eller API:CH-4.
Never disconnect the current with the main switches when the engine is running, the alternator and electronics could be damaged. The main switches must never be switched off before the engine has stopped.
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat