Volvo Penta TAD550/750/751/752/753/754GE industrial engines control system installation. The installation must be prepared for well and carried out with the greatest care.
This document describes how the Volvo Penta industrial engines equipped with the control systems EMS and EMS2 may be controlled.
The following points must be given extra thorough consideration when designing a cooling system: • The maximum ambient temperature the engine must operate in. • Cooling air flow direction, i.e. if a puller or pusher fan is to be used. A pusher fan is recommended for generator sets to avoid generator overheating. On mobile applications, consideration must be give to any slipstream.
EMS 2 stands for "Engine Management System" and is an electronic system with CAN communications (Controller Area Network) for control of diesel engines. The system has been developed by Volvo Penta and includes fuel control and diagnosis function.
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat