Normally Closed-(Symbol N.C.) - As applied to a magnetically operated device such as a valve or the contacts of a relay, Normally Closed indicates that the valve or relay contacts are closed when no power is supplied to the operating magnet.
The battery plus and minus in the EIC is connected to the battery via the starter motor. I.e. these pins in the EIC are outputs that are intended to power other CAN nodes connected to the engine CAN network. Failure to do this can cause EECU damages.
Note: Some of the terms defined and explained within this glossary apply particularly to current Cummins Generator Sets
It is possible to read and adjust parameters with the VODIA tool, part no.3838619, as described in the following pages. The VODIA tool is connected to the diagnostics socket, a 6-pin connector; refer to VODIA user instructions for instructions.
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat